Just When You Think You Just Have Colds? Think Again, It Could Be Something Else
Just When You Think You Just Have Colds? Think Again, It Could Be Something Else

Nowadays, a lot of health problems are starting to affect our well-being. The most common health problem that strikes each and every one of us is the common cold. Common old is an upper respiratory tract infection caused by viruses and is considered the most common infectious disease in humans. Common cold is highly contagious yet barely fatal. But how sure are you that the common cold you have is just “common cold” caused by the rhinovirus and not anything else? Have you heard about the cold symptoms caused by black molds?

The black mold or the stachybotrys chartarum, also known as the toxic mold is the black dirt-like substance that we see on our bathroom tiles, drywall, and in moist areas where there are water pipe leaks, overflowing bathtubs and kitchen sink and in the basement. The black mold is a fungus that thrives in moist and humid areas. Sometimes, black molds start to contaminate our homes undetected especially if the source of moisture is unknown. Any type of mold can cause health problems, but the black mold is the most dangerous one as it causes a lot of adverse effects. Black mold’s spores contain mycotoxins. These mycotoxins are responsible for causing the health hazards. That’s why black mold removal is essential in the maintenance of one’s well-being.

Some people think that their flu like symptoms is just common cold, but what they don’t know is that it could be symptoms of infection caused by the toxic black mold. Mold symptoms are very much similar to cold symptoms. The mycotoxins of black molds strike and affect mostly those who are immunocompromised – infants, elder persons, those with an existing illness and those who are taking immunosuppressant drugs. Just like the common cold virus, black mold mycotoxins also attack the immune system making the affected person more susceptible to it. After which the affected person may start to manifest signs and symptoms of runny nose, sore throat, fever, coughing, sneezing, body malaise, fatigue, pink or irritated eye, headaches, and respiratory tract infections.

Frequent exposure to black mold could further suppress you immune system thereby increasing the mold infection’s resistance against you antibodies and start attacking the central nervous system and other vital organs such as the brain, liver and kidneys. Central nervous system symptoms may be manifested by irritability, decreased attention span, seizures, dizziness, lightheadedness, and headaches.

Black mold removal is highly recommended and to prevent these toxic molds from doing any harm to you and your loved ones. Spring time in New York is the best time for mold growth because of moisture and the climate starts to get warmer. This will also be the best time to start the New York mold inspection of each and every household so as to prevent and early detect mold growth and be able to perform necessary black mold removal actions.

Remember that health is wealth and it should be taken cared of properly. Don’t just take any common colds lightly. Inspect your homes regularly for any moisture condensation, pipe leaks, roof holes or any possible source of mold growth.

Mold inspections NYC-mold remediation nyc,mold removal services nyc,mold inspections nyc

Black Mold Removal: Is it Safe?
Black Mold Removal: Is it Safe?

Black molds are also known as “toxic molds”. They are labeled as such because unlike any other mold types, black mold can cause health hazards. Black molds prefer to thrive in damp areas most especially in organic and inorganic materials that are cellulose or fibrous in consistency like paper, cardboard, bread, lint, ceiling, wooden panels, carpets and a lot more. Black mold can contaminate and start to cultivate in your household in cases where there is water flood damage and constant dampening in a particular area of your house caused by water pipe leaks. Initiate black mold removal as early as possible, so as to prevent it from spreading and contaminating other areas of your household.
Upon contamination, black molds can proliferate in as short as 24-48 hours. By this timeframe, it may already cause great damage to your furnishings. Black mold removal is the only way that’s appropriate to get rid of these rankles. However, black mold removal is something that should not be misunderstood. It’s not like your regular dusting and cleaning. You are not allowed to scrape off the black mold. Remember that black molds are toxic. They are called so because they contain with them mycotoxins which are byproducts of their metabolism. Mycotoxins are contained in mold spores that are easily detached from the black mold and can contaminate the circulating air. Scraping the mold would only lead to accidental inhalation and ingestion of the mold spores. When inhaled, the mycotoxins in molds spores can cause cough, allergic reactions, skin rashes, hemoptysis (coughing out of blood), respiratory tract infection, conjunctivitis or eye irritation, nausea and vomiting, and fatigue to an immunocompromised host and a lot more potentially life threatening ailments.
Black mold removal is not safe especially when done the wrong way. Scrupulous mold removal with the use of fungicides and antimicrobial agents are the best means to remove the mold infestation. Your initial step to make is to locate and eliminate the source of cultivation. In the case of molds, their life source comes from moisture and humidity. If the cause of, black mold growth is pipe leaks, fix it. Once the problem is fixed, you can now proceed with the black mold removal.
Firstly, contain the black mold in one area by preventing it from spreading into uncontaminated areas. So how can you contain black mold? By making wall-to-wall and floor-to-ceiling plastic sheeting around the mold growth, you will be able to contain the black mold. Dry up the area to prevent the moisture from sipping in further by using dehumidifiers. The use of standard electric fans is not advisable as fanning can cause the mold spores to spread and contaminate the air.
Once the black mold is contained and the work area is dried, you are now ready to go the next step of black mold removal; the killing of the mold. With proper protective shield such as gloves, mask, eye shields, biohazard suits, start the killing of the black mold by fogging or spraying the area with all organic and natural fungicides and home remedies for killing mold. Natural forms of mold killing agents are safer and advocates green living. Bleaches are not advisable as they can’t kill molds. Let the fungicides stay for an hour to ascertain optimum mold killing.
Once the toxic molds are killed, you may now proceed with the removal of the mold. Black mold removal is done by scrubbing the area with mold cleaners that are advocated by the EPA. Once the molds are fully removed, get rid of the materials that are contaminated and replace them with materials that do not permit mold growth to prevent the mold from coming back. Prevention is the last and final step of the black mold removal process. Removing mold is one sure way to guarantee the safety of you and your family’s health.
If you are uncertain as how to implement the black mold removal process, you may contact the black mold removal experts like Certified Mold Inspections Inc. CMI have been in the business of mold removal for over a decade and is the leading black mold removal expert in New York, offering services like fumigation, mold inspections, mold testing and a lot more.

Mold inspections NYC-mold remediation nyc,mold removal services nyc,mold inspections nyc

FIVE BORO TAKES PRIDE IN ITS EAGLE EYE MOLD INSPECTION
FOR IMMEDIATE RELEASE

Contact:
Five Boro Mold Specialist, Inc.
1565 Hendrickson Street
Brooklyn, New York 11234
(646) 758-0547
www.fiveboromoldspecialist.com

FIVE BORO TAKES PRIDE IN ITS EAGLE EYE MOLD INSPECTION

Brooklyn, New York – Five Boro Mold Specialist Inc., takes pride in their satisfactory and outstanding mold remediation service, using their eagle eye method of mold inspection. NYC mold inspections is one of Five Boro Mold Specialist, Inc.’s fortes. Mold inspection involves the use of objective and visual assessment to identify the cause of mold problem. The efficacy of Five Boro’s mold inspection and mold removal procedures are all dependent in their professional inspectors’ keen eyes, dedication, and their use of avant-garde mold inspection equipments.

Mold inspection is a prerequisite to mold removal. Through methodical and meticulous inspection of the over all structural components of the house or building, the inspectors of Five Boro’s New York mold inspection inspection team are able to determine the extent of mold infection and decide on the suitable means of mold remediation. Without prior inspection of the area, mold remediation may not deliver absolute and total voiding of molds. The purpose of the mold inspection is to track down and stop the cause of mold infection before it can cause further damage to one’s household and health.

Five Boro uses up-to-the-minute equipments like infrared scanners and moisture meters, as well as particle detectors to aid them during their NYC mold inspection. Infrared scanners and moisture meters are very useful in spotting areas unseen by the naked eye like between walls, air ducts and ventilation systems. They also come in hand in locating the cause and/or source of moisture such as roof and water pipe leaks. Particle detectors are used to determine whether the surrounding and circulating air is contaminated. With these equipments, Five Boro is able to acquire an eagle eye that lefts nothing unseen. “I’ve seen how their inspectors work, and I mist say that are truly good at what they do and their equipments are really modernized,” said David Michaels, a landlord of an apartment in New York.

Part of Five Boro Mold Specialist, Inc.’s NYC mold inspections is mold testing. Mold testing and air sampling are done in order to classify the type of mold growth based on the mold’s deoxyribonucleic acid content, whether it is a toxic black mold or just an ordinary white mold commonly found devouring dreads. The mold testing is done in an independent laboratory. Five Boro offers their clients with a 24 hour turn around mold testing report and comprehensive interpretation of the infrared and moisture meter scan pictures, as well as on the spot preliminary review of their New York mold inspection services.

About Five Boro Mold Specialist, Inc.
Five Boro is a mold remediation company based New York that offers quality mold inspection, mold remediation and water damage restoration services at a reasonable price. They have offices in Brooklyn, Long Island and Manhattan and offer 24/7 mold and water damage emergency support. For 10 years in a row, Five Boro has never failed in giving premium and satisfactory services to their clients

###
Mold inspections NYC-mold remediation nyc,mold removal services nyc,mold inspections nyc

Bookmark It